Product Details

Standard Range

3691 Click on the above image for a full view ...

Description: All Mains transformers in this section are suitable for 230-240V, 50-60Hz supply. Secondary voltages are specified at 240V input and should be reduced in proportion when the input is below 240V.A range of high quality mains transformers, all with single mains primary windings and twin secondaries, wound on double-section safety bobbins. All comply with BS3535 / EN60742. Note 6VA Chassis types would require extra insulation between tags and fixing clamp if used in a double insulated application. If core is connected to accessible metal parts, they should be earthed.Secondaries can be connected in parallel to double the current capacity, or in series to double the voltage or form a centre-tapped secondary.  Connections are by solder tags.  6VA Chassis  Mounting  With 2-hole fixing clamp and solder tags.  Dimensions:  Size (W x D x H): 45 x 40 x 37mm Fixing centres: 54mm Outputs:  Maximum Code Secondaries Current  WB06G 2 x 6V 500mA  DH24B 2 x 9V 333mA  WB10L 2 x 12V 250mA  WB20W 2 x 24V 125mA  12VA Chassis  Mounting  With 2-hole fixing clamp and solder tags.  Dimensions:  Size (W x D x H):  59 x 50 x 49mm  Fixing centres: 70mm  Outputs:  Maximum Code Secondaries Current  YJ50E 2 x 6V 1A  WB11M 2 x 9V 666mA  DM27E 2 x 12V 500mA  DM28F 2 x 15V 400mA  20/25VA Chassis Mounting  With 2-hole fixing clamp and solder tags.  Dimensions:  Size (W x D x H): 69 x 57 x 57mm Fixing centres: 80mm Outputs:  Maximum Code Secondaries Current  YJ51F 2 x 6V 2A  DH26D 2 x 9V 1· 38A  WB25C 2 x 12V 1A  DH27E 2 x 15V 830mA  50VA Chassis Mounting  Dimensions:  Size (W x D x H): 78 x 63 x 65mm Fixing centres: 92mm Output:  Maximum Code Secondaries Current  DH29G 2 x 6V 2.78A  WB26D 2 x 12V 2A  DH32K 2 x 20V 1.25A  100VA Chassis Mounting  Dimensions:  Size (W x D x H): 91 x 70 x 77mm Fixing centres: 4 holes @ 57 x 45mm Output:  Maximum Code Secondaries Current  DH35Q 2 x 12V 4.17A